The Eberle Instat 6 uses screw terminals on the rear. Ensure correct wire gauge (0.5-2.5 mm² solid or stranded).
A: Press and hold Up + Clock for 5 seconds. "Loc" appears. Repeat to unlock. eberle instat 6 user manual english
Use Up/Down to select PXX, press Clock, adjust value with Up/Down, press Clock to save. Exit by holding Auto/Manual for 3 seconds. 8. Wiring Diagram and Terminal Assignments Danger: 230V AC present. Only for qualified installers. The Eberle Instat 6 uses screw terminals on the rear
Press and hold Up + Down simultaneously for 8 seconds until P01 appears. adjust value with Up/Down
A: Set P02 to a lower cycle time (e.g., 5 minutes) and ensure the thermostat is not near drafts or sunlight.