Foxconn N15235 Motherboard Front Panel Connectors May 2026
Missing Pin ● ● ● ● ● (Row 1: 5 pins) ● ● ● ● (Row 2: 4 pins) Pin 1 The missing pin is typically on Row 2, position 4 or 5. Do not attempt to plug anything into the missing hole. 3. The Official Pinout Diagram for Foxconn N15235 After cross-referencing OEM manuals from Acer Aspire M3800, M5810, and eMachines ET1830 series, the definitive pinout for the Foxconn N15235 front panel connector is as follows:
The is a legacy micro-ATX board commonly used in pre-built systems from the early 2010s. While reliable, finding official documentation for its front panel connectors (power switch, reset, HDD LED, power LED) is notoriously difficult because Foxconn manufactured these boards specifically for OEMs (Original Equipment Manufacturers) like Acer and eMachines. foxconn n15235 motherboard front panel connectors
A: Absolutely. The N15235 uses standard ATX front panel pin spacing (2.54mm). Any modern case’s front panel cables will fit. Just follow the pinout in Section 3. Missing Pin ● ● ● ● ● (Row
| Pin Number | Signal Name | Typical Wire Color | Function | |------------|--------------------|--------------------|------------------------------------| | 1 | HDD_LED (+) | Red or Orange | Hard Drive Activity Light (Positive) | | 2 | HDD_LED (-) | White or Black | Hard Drive Light (Ground/Negative) | | 3 | POWER_SW (+) | Red or Yellow | Power Button (Positive) | | 4 | POWER_SW (-) | Black or White | Power Button (Ground) | | 5 | Reserved / N/C | None | Do not connect anything here. | | 6 | POWER_LED (+) | Green or Blue | Power Indicator Light (Positive) | | 7 | RESET_SW (+) | Blue or Orange | Reset Button (Positive) | | 8 | RESET_SW (-) | White or Black | Reset Button (Ground) | | 9 | POWER_LED (-) | White or Black | Power Indicator Light (Neg/Ground) | | NC (hole) | Key (missing pin) | N/A | Prevents wrong orientation. | The Official Pinout Diagram for Foxconn N15235 After
Disclaimer: This pinout is based on the most common revision (Rev 1.0/1.1) of the Foxconn N15235. Minor OEM variations exist. When in doubt, test with a multimeter.
Missing Pin ● ● ● ● ● (Row 1: 5 pins) ● ● ● ● (Row 2: 4 pins) Pin 1 The missing pin is typically on Row 2, position 4 or 5. Do not attempt to plug anything into the missing hole. 3. The Official Pinout Diagram for Foxconn N15235 After cross-referencing OEM manuals from Acer Aspire M3800, M5810, and eMachines ET1830 series, the definitive pinout for the Foxconn N15235 front panel connector is as follows:
The is a legacy micro-ATX board commonly used in pre-built systems from the early 2010s. While reliable, finding official documentation for its front panel connectors (power switch, reset, HDD LED, power LED) is notoriously difficult because Foxconn manufactured these boards specifically for OEMs (Original Equipment Manufacturers) like Acer and eMachines.
A: Absolutely. The N15235 uses standard ATX front panel pin spacing (2.54mm). Any modern case’s front panel cables will fit. Just follow the pinout in Section 3.
| Pin Number | Signal Name | Typical Wire Color | Function | |------------|--------------------|--------------------|------------------------------------| | 1 | HDD_LED (+) | Red or Orange | Hard Drive Activity Light (Positive) | | 2 | HDD_LED (-) | White or Black | Hard Drive Light (Ground/Negative) | | 3 | POWER_SW (+) | Red or Yellow | Power Button (Positive) | | 4 | POWER_SW (-) | Black or White | Power Button (Ground) | | 5 | Reserved / N/C | None | Do not connect anything here. | | 6 | POWER_LED (+) | Green or Blue | Power Indicator Light (Positive) | | 7 | RESET_SW (+) | Blue or Orange | Reset Button (Positive) | | 8 | RESET_SW (-) | White or Black | Reset Button (Ground) | | 9 | POWER_LED (-) | White or Black | Power Indicator Light (Neg/Ground) | | NC (hole) | Key (missing pin) | N/A | Prevents wrong orientation. |
Disclaimer: This pinout is based on the most common revision (Rev 1.0/1.1) of the Foxconn N15235. Minor OEM variations exist. When in doubt, test with a multimeter.