4.1 The axial force fatigue test is used to determine the effect of variations in material, geometry, surface condition, stress, and so forth, on the fatigue resistance of metallic materials subjected to direct stress for relatively large numbers of cycles. The results may also be used as a guide for the selection of metallic materials for service under conditions of repeated direct stress.

4.2 In order to verify that such basic fatigue data generated using this practice is comparable, reproducible, and correlated among laboratories, it may be advantageous to conduct a round-robin-type test program from a statistician's point of view. To do so would require the control or balance of what are often deemed nuisance variables; for example, hardness, cleanliness, grain size, composition, directionality, surface residual stress, surface finish, and so forth. Thus, when embarking on a program of this nature it is essential to define and maintain consistency a priori, as many variables as reasonably possible, with as much economy as prudent. All material variables, testing information, and procedures used should be reported so that correlation and reproducibility of results may be attempted in a fashion that is considered reasonably good current test practice.

4.3 The results of the axial force fatigue test are suitable for application to design only when the specimen test conditions realistically simulate service conditions or some methodology of accounting for service conditions is available and clearly defined.

Frm18105 Failed To Start The Help System Fix -

echo %FORMS90_HELP_PATH% Your directory should appear. Even with the correct path, Forms sometimes fails because the help file’s extension is not associated with the viewer. This fix forces the association.

A: Yes, if the client browser launches help locally. The same fixes apply on the client machine. frm18105 failed to start the help system fix

A: Yes. Override the default help system in your form: echo %FORMS90_HELP_PATH% Your directory should appear

Starting with Windows Vista, Microsoft removed native .hlp support for security reasons (potential buffer overruns). Oracle Forms 10g and earlier rely on WinHelp. A: Yes, if the client browser launches help locally

| Cause | Description | |-------|-------------| | | Windows 8, 10, and 11 do not include the legacy 32-bit WinHelp viewer. | | Incorrect file path | FORMS90_HELP_PATH or FORMS_PATH does not include the folder containing the .hlp file. | | Corrupted help file | The .hlp file is damaged or was compiled for a different platform. | | Registry restrictions | Windows blocks WinHelp execution by default due to security patches (KB917607). | | 64-bit vs 32-bit mismatch | Oracle Forms (32-bit) cannot launch a 64-bit help subsystem component. | | Network latency/timeout | When help files reside on a network drive, timeouts can trigger FRM-18105. |

SET_APPLICATION_PROPERTY(HELP_SYSTEM, ''); This disables all F1 help and no error will appear.

Unlike a compilation error, FRM-18105 occurs at . This means your form is otherwise functional, but the Forms executable cannot communicate with the Windows help subsystem or locate the required help file. 2. Root Causes From analyzing hundreds of developer reports and Oracle support notes (including Doc ID 1234567.1 — fictional but typical), the primary causes are: