The device can be deployed with ZTP via DHCP option 67 (config file URL) or USB auto-configuration. 10. Environmental Specifications Rugged enough for unheated telecom shelters.
2x SIC-4GEF → 8 GE ports + 4 fixed GE combo ports + 2x 10GE uplinks = 14 GE + 2x 10GE logical interfaces. 4. Performance and Switching Capacity The ATN 910D-A is engineered for non-blocking forwarding under real-world traffic patterns.
| Component | Part Number | |-----------|--------------| | | 02350GTL | | AC Power Module | 02312MNH | | DC Power Module | 02312MNI | | SIC-4GEF (4x GE SFP) | 03030TNF | | SIC-2XGF (2x 10GE SFP+) | 03030TNG | | SIC-1T1E1 (8x T1/E1) | 03030TNH | | Fan module (spare) | 02351AEW | | Software license – Advanced IP & MPLS | L-ATN910DA-IPMPLS | Note: Always check with Huawei or a certified distributor for current lifecycle status (active vs. EoS). 13. Comparison: ATN 910D-A vs. ATN 910C vs. ATN 950B To understand placement, compare the 910D-A to siblings. Huawei Atn 910d-a Datasheet
Introduction In the rapidly evolving landscape of transport networks, the demand for high-bandwidth, low-latency, and resilient aggregation devices has never been greater. As mobile backhaul evolves from 4G to 5G and enterprise private lines migrate to all-IP architectures, Huawei has positioned the ATN (Aggregation Transport Node) series as a cornerstone of its mobile transport solution.
| Card Model | Interface Type | Port Count | Use Case | |------------|----------------|-------------|-----------| | | T1/E1 (channelized) | 8 ports | Legacy TDM backhaul | | SIC-4GEF | GE (optical/electrical) | 4 ports | Ethernet aggregation | | SIC-2XGF | 10GE SFP+ | 2 ports | High-bandwidth uplinks | | SIC-8FE | Fast Ethernet (RJ45) | 8 ports | Low-speed sensor/device aggregation | | SIC-2GEC | GE combo (copper/SFP) | 2 ports | Flexible media conversion | The device can be deployed with ZTP via
| Metric | Value | |--------|-------| | | 48 Gbit/s | | Forwarding Rate (64-byte packets) | 24 Mpps (million packets per second) | | MAC Address Table Size | 32K entries | | IPv4 Route Table (FIB) | 64K routes (default) / up to 128K with license | | IPv6 Route Table | 32K routes | | Jumbo Frame Support | Up to 9216 bytes |
Huawei lists the ATN 910D-A as (not End-of-Sale) until 2027, with support extended to 2032. 16. Conclusion: Why the ATN 910D-A Matters The Huawei ATN 910D-A datasheet reveals a device that strikes an excellent balance between port density, protocol maturity, and power efficiency. Its modular SIC architecture future-proofs investments — operators can swap T1/E1 cards for 10GE cards without replacing the chassis. 2x SIC-4GEF → 8 GE ports + 4
| Feature | Detail | |---------|--------| | | 8 (strict priority + WRR/DWRR) | | Traffic classes | Up to 64 per system | | Shaping | Per port, per queue, per VLAN | | Policing | Two-rate three-color marker (RFC 2698) | | Congestion avoidance | WRED (Weighted Random Early Detection) | | Remarking | 802.1p, DSCP, EXP bits |