Hw-044 Datasheet May 2026

Introduction

For 44.1 kHz / 16-bit stereo, BCLK = 44,100 × 16 × 2 = 1.4112 MHz. The HW-044 handles this easily. hw-044 datasheet

| HW-044 Pin | Arduino Due Pin | |------------|------------------| | BCLK | Pin 3 (DAC1) | | LRC | Pin 2 (DAC0) | | DIN | Pin 9 (DAC2) | | Others | Same as above | 5. Gain and Channel Configuration (Pin Strapping) The HW-044 module allows you to configure the amplifier gain and audio channel selection by connecting the GAIN and SD_MODE pins to either VIN, GND, or leaving them floating. Gain Settings (via GAIN pin) | GAIN Connection | Gain (dB) | Output Level (max) | |----------------|-----------|--------------------| | Float (default) | 9 dB | ~1.4x input | | VDD (VIN) | 12 dB | ~2.0x input | | GND | 15 dB | ~2.8x input | | Not available* | 18 dB * | Not on HW-044 | Introduction For 44

void setup() Serial.begin(115200); WiFi.begin("SSID", "PASSWORD"); while (WiFi.status() != WL_CONNECTED) delay(1000); Gain and Channel Configuration (Pin Strapping) The HW-044

Raspberry Pi can use the HW-044 via the device tree overlay:

The is a highly popular, inexpensive, and versatile breakout board for the MAX98357 audio amplifier IC. If you are searching for the hw-044 datasheet , you are likely working on an embedded audio project involving an Arduino, ESP32, ESP8266, Raspberry Pi, or any other microcontroller that supports I²S (Inter-IC Sound) audio.

| Module | Input | Channels | Power (5V, 4Ω) | SNR | Complexity | |--------|-------|----------|----------------|-----|-------------| | | I²S Digital | 1 | 3.2W | 94dB | Low (no ADC needed) | | LM386 | Analog | 1 | ~1W | 70dB | Very low | | PAM8302 | Analog | 1 | 2.5W | 85dB | Low | | MAX98306 | I²S | 2 (Stereo) | 2x3.7W | 93dB | Medium | | DFPlayer Mini | Serial/MP3 | 1 | 3W | 80dB | Medium (with SD card) |