Pan186cv Datasheet New -

| Pin No. | Symbol | Description | | :--- | :--- | :--- | | 1 | | Supply input (4.5V to 40V). Bypass with 10µF + 0.1µF ceramic near pin. | | 2 | SW | Switching node. Connect to inductor (33µH–100µH typical). | | 3 | GND | Power ground. Must be connected to exposed thermal pad. | | 4 | FB | Feedback input. Connect resistor divider (Vout = 1.23V * (1 + R1/R2)). | | 5 | EN | Enable input. Logic high (>1.6V) to enable; low (<0.8V) to disable. |

| Parameter | Test Condition | Min | Typ | Max | Unit | | :--- | :--- | :--- | :--- | :--- | :--- | | | 4.5V ≤ VIN ≤ 40V | 1.206 | 1.23 | 1.254 | V | | Oscillator Frequency | Rosc = 100kΩ | 135 | 150 | 165 | kHz | | Switch ON Resistance | Isw = 2A | — | 0.25 | 0.35 | Ω | | Peak Current Limit | — | 2.6 | 3.0 | 3.5 | A | | Thermal Shutdown | Hysteresis = 15°C | 150 | 165 | — | °C | | EN Logic Low | Disable threshold | — | 0.6 | 0.8 | V | | EN Logic High | Enable threshold | 1.6 | 2.0 | — | V | pan186cv datasheet new

The semiconductor market is constantly evolving, and staying updated with the is critical for design integrity. For engineers working with power management, LED drivers, or battery charging circuits, the designation "pan186cv datasheet new" has been generating significant search traffic over the past quarter. | Pin No

52°C/W (Minimum copper area) Junction-to-Ambient (RθJA): 28°C/W (With 2 oz copper plane) | | 2 | SW | Switching node

But what exactly is the Pan186CV? What has changed in the revision? And how do you interpret the critical electrical characteristics to avoid design flaws?

| Parameter | Old Revision (Rev A) | | Impact | | :--- | :--- | :--- | :--- | | Quiescent Current (Standby) | 5 mA | 1.8 mA | Better battery life in standby | | Shutdown Current | 80 µA | 3 µA | Critical for low-power IoT devices | | Feedback Voltage Tolerance | ±4% | ±2% | Improved output regulation | | Thermal Shutdown Temp | 150°C | 165°C | Higher headroom for hot environments | | ESD (HBM) | 2 kV | 4 kV | More robust handling | Note: The "new" datasheet also explicitly warns against floating the Enable (EN) pin —a common error in older designs. The EN pin now has an internal 5 µA pull-up current; leave it open for auto-start or drive high for operation. 3. Pin Configuration (Top View - TO-252-5L) The new Pan186CV uses a 5-pin TO-252 package. Here is the updated pinout from the datasheet:

Publication Date: June 2026 Component Status: Active / New Revision