Parallel Data Cable (Printer extension cable, with male-female 25 pin connector, and pin to pin through)	A-A type USB cable(for power)



ATMEL89 Adapter	ATMEL PLCC 44 Adapter	TSOP 48 Adapter

FWH/HUB PLCC32Adapter	PLCC32 Adapter	SOIC Adapter(Simplified)
On-Board	On-Board
AC or DC Power Adapter (9V or 12V, 200mA)	SOIC Adapter(Professional)	
		

Rajjo Episode 1 Hotstar 

If you love underdog stories, specifically those rooted in Indian rural culture with a sports twist, this is your next binge-watch. Rajjo Episode 1 on Hotstar is a declaration of intent. It tells the audience: "This is not your grandmother's soap opera." It is raw, slightly violent in its depiction of social abuse, and beautifully aspirational.

4/5 Stars.

When a new television drama promises to break the mold of traditional family sagas, audiences take notice. Rajjo Episode 1 on Hotstar (now part of Disney+ Hotstar) did exactly that upon its release. It didnt just introduce characters; it threw viewers headfirst into a world of socio-economic divides, fiery ambition, and the raw, unforgiving landscape of Uttar Pradesh. rajjo episode 1 hotstar

Log in to Disney+ Hotstar, search for "Rajjo," and click on Episode 1. Prepare for a ride that starts with a sprint and promises to go the distance. Have you watched Rajjo Episode 1 on Hotstar? What did you think of the Kabaddi match climax? Let us know in the comments below. If you love underdog stories, specifically those rooted

Episode 1, available exclusively on Hotstar, establishes the central conflict immediately: the clash between the privileged, ruthless Thakur family and the voiceless villagers. The keyword here is "grit." Within the first ten minutes, the director establishes that this is not a world of glass palaces, but one of mud, sweat, and silent rage. Warning: Mild spoilers ahead for Rajjo Episode 1 on Hotstar. 4/5 Stars

For those who missed the premiere or are looking to dissect the nuances of the opening chapter, this article provides a comprehensive breakdown of the plot, character introductions, thematic undertones, and why this first episode is a must-watch. Before diving into the specifics of Episode 1, it is crucial to understand the premise. Unlike typical Hindi GECs (General Entertainment Channels) that rely on saas-bahu tropes, Rajjo positions itself as a story of survival. The series follows the titular character, Rajjo, a fierce and resilient girl from a humble background who dreams of becoming a national-level Kabaddi player.

Installation Steps


Check the parallel printer port setting in the bios, it should be EPP or Normal.
Check there are any active resident programs that use the printer port, such as TWAIN drivers. You may have to remove it.
Connect one end of the 25 pin SubD parallel cable to PCprinter port
Connect the other end of parallel cable to 25Pins port of the programmer
Connect USB power cable or AC adaptor (Note: if you are working on the EPROM programming. You may need use a AC adaptor, so that you can get Vcc 5.6V and 6.2V when doing programming)
Theyellowpower normal indicator of the programmer should light up, then the programmer power supply is normal.
Run the software
Select devices type
Click the Willem in toolbar to change to PCB3
Set the DIP switch based on the displayed pattern.

 (Note: theLPT portof PC MUSTset to ECP or ECP+EPP during BIOS setup. To enter the BIOS setting mode, you need press "Del" key or "F1" key during the computer selftest, which is the moment of computer just power up.)



Software Version To Use

The softwarecan be download fromdownload.mcumall.com

There are board hardware selection jumper on the board. When set the jumper to PCB3B, then user have to use 0.97ja and before version software.

If the board selection set to PCB3.5, PCB5.0, PCB5.5C, then the software 0.98D6 should be used.



 The softwareinterface:



rajjo episode 1 hotstar



Hardware Check

After start the program, click test hardwar under Help menu. If the connection and power supply is normal, then appears: "Hardware present" Otherwisecheck if the programmer connects well with PC, or power supply is normal.



Jumper Configuration



PCB3.5/PCB4E

rajjo episode 1 hotstar 
(Two PLCC32 adapter is not applied on the PCB4E)



PCB5.0

rajjo episode 1 hotstar



PCB5.5C



rajjo episode 1 hotstar

Note: the Vcc setting jumper only has effect when you are using AC adaptor as power source. For the USB power only 5V Vcc is available.

For the PCB5.5C, set DIP steps:

1. press DIP Set button twice to check current DIP bit position. Then set it again for ON or OFF.

2. press DIP Bit shift button to shift the DIP bit position to where need to set. And then press DIP Set button twice to check current DIP bit position. Then set it again for ON or OFF.

3. Repeat those steps till all DIP bit ae set same as software indicated.

For PCB5.5C voltage and Special chip selection:

1. Put back the safety jumper.

2. Press the voltage button and hold for 1 second, the voltage LED should move to next. Repeat till desired voltage LED light up.

3. Press the chip selectionbutton and hold for 1 second, the chip LED should move to next. Repeat till desiredLED light up.

4. Remove the safety jumper to lock the selected voltage and chip selection



DIPSwitch (PCB3.5, PCB5.0)

rajjo episode 1 hotstar 

When programming one chip, followthe program prompt to set DIP switch.



4/5 Stars.