Yl105 Datasheet Page

If you have searched for the , you are likely looking for pinout specifications, trigger logic levels, power requirements, or application diagrams. While the YL105 is a generic module (often manufactured by multiple vendors without a single "official" datasheet), this article consolidates the standard specifications, electrical characteristics, and usage guidelines that apply to 99% of YL105 modules found on the market.

void loop() digitalWrite(relayPin, HIGH); // turn relay ON delay(2000); digitalWrite(relayPin, LOW); // turn relay OFF delay(2000);

| | Likely Cause | Solution | |-------------|------------------|---------------| | Relay does not click | No power on VCC | Check 5V and GND connections. | | Relay clicks but load doesn’t turn on | Wrong wiring (NC vs NO) | Load should be connected to COM and NO. | | Random toggling | Floating input pin | Use a pull-down (active HIGH) or pull-up (active LOW) resistor (10kΩ). | | Microcontroller resets when relay activates | Power supply insufficient | Relay coil draws ~80mA. Use a separate 5V supply for module. | | Jumper setting ignored | Poor contact | Remove/insert jumper multiple times or solder the desired connection. | 8. YL105 vs. Other Relay Modules How does the YL105 compare to similar modules? yl105 datasheet

When working with AC mains voltage (110V/230V), take all necessary safety precautions. Use insulated enclosures, avoid live testing, and never leave the module powered while unattended. Need more technical specifics? Leave a comment or refer to the component-level datasheets linked in Section 9. Happy switching!

| | Min | Typ | Max | Unit | |---------------|---------|---------|---------|----------| | Supply Voltage (VCC) | 4.5 | 5.0 | 5.5 | V DC | | Input High Voltage (IN - HIGH mode) | 3.0 | 5.0 | 5.5 | V | | Input Low Voltage (IN - LOW mode) | 0 | 0.8 | 1.5 | V | | Input Current (IN pin) | – | 5 | 15 | mA | | Relay Coil Current | – | 70 | 90 | mA | | Total Module Current | – | 85 | 110 | mA | Relay Contact Ratings (Load Side) | Load Type | Voltage | Max Current | |---------------|-------------|------------------| | Resistive AC | 250V AC | 10A | | Resistive DC | 30V DC | 10A | | Inductive AC | 250V AC | 7A | | Inductive DC | 30V DC | 5A | Warning: Do not exceed these ratings. The relay may weld shut or catch fire. 4. Timing Characteristics (Switching Speed) For applications requiring high-speed switching (e.g., dimming, pulse control), the relay’s mechanical nature limits operation. Refer to these timing specs: If you have searched for the , you

Introduction In the world of electronics and microcontroller projects (Arduino, Raspberry Pi, ESP8266, STM32), the ability to control high-power devices—such as lamps, motors, solenoids, and pumps—using low-power logic signals is essential. The YL105 is one of the most popular and widely available single-channel relay modules designed precisely for this purpose.

Whether you are automating your home, building a robot, or designing a safety cutoff, the YL105 offers a reliable bridge between the fragile world of microcontrollers and the demanding realm of high-power electronics. Always respect the voltage ratings, adhere to proper wiring practices, and consult the SRD-05VDC-SL-C and PC817 datasheets for deeper technical insight. | | Relay clicks but load doesn’t turn

| | YL105 | SRD-05VDC-SL-C (bare relay) | KY-019 | Songle 1-channel | |-------------|-----------|--------------------------------|------------|----------------------| | Opto-isolated | Yes | No | Yes | Yes | | Active LOW/HIGH selectable | Yes (jumper) | No | Fixed HIGH | Fixed LOW | | LED indicators | Power + Status | None | Power + Status | Power + Status | | Screw terminals | Yes (3 pins) | No | Yes (3 pins) | Yes (3 pins) | | Typical price | $2–$4 | $1 | $3–$5 | $2–$4 |